General Labware, lab products and accessories from BRAND for processing and storing samples. Here you will find Seal R Films, Erlenmeyer flasks, Beakers, Magnetic stirring bars and other lab accessories. Depending on your requirements, materials like glass or high-quality plastic are used to ensure safe sample handling in the laboratory.

Sealing film and Film Cutter

  • Seal-R-film™ applications: Protecting sensitive samples from contamination, Sealing containers such as flasks, beakers, cuvettes, petri dishes and irregularly shaped containers + Covering plugs to ensure a very secure seal + Protecting from humidity for long-term storage
  • Technical feature: Thickness: 0.14 +/- 0.02mm, Toxicity: non-toxic, Melting point: > 66°C (151°F), Boiling point: > 288°C (550°F), Continuous service temperature: -20°C to 46°C, Elasticity (25°C): 300%, Tear strength (25°C): 1.5 MPa
  • Protects against evaporation, leakage, and contamination
  • Lot identification of each roll for traceability
  • Seal R Film Rolls are available in 50mm, 100mm, 500mm width and 75mtr, 38mtr and 15mtr respectively
  • The sealing film can be stretched to three times its original length. This means that Seal-R-film™ always fits, even with irregular shapes.
  • BRAND cutter for sealing film you can cut rolls with widths of 50 and 100 mm efficiently and economically and store them cleanly.
  • Seal-R-film™ chemical resistance up to 48 hrs. against many polar substances e.g.; saline solutions, inorganic acids and alkaline solutions.

Pasteur & Capillary or Dropping Pipettes

  • Pipettes for your laboratory. Whether disposable micropipettes, Pasteur pipettes, capillary or dropping pipettes – here you will find the right pipette for precise volume measurement and accurate repetitive pipetting.
  • In soda-lime glass and plastic quality available in many sizes.
  • Selecting the right pipette depends on factors such as volume range, application, and frequency of use.
  • Pasteur pipettes, PE-LD. very good reproducibility of the number of drops per millilitre. Ideal for aliquots.
  • Pasteur pipettes can be filled and deep-frozen or changed into a closed vessel by heat-sealing the tip.
  • The integrated pipetting bulb depresses easily, minimizing fatigue from frequent pipetting and resistant to gas or gamma radiation sterilization. Suction volume are available for 3.3ml, 4.4ml, 5ml, 5.5ml, 6.2ml and 7ml.
  • Pasteur pipettes, Soda-lime glass as per ISO 7712 and long drawn-out capillary tip. Suction end with constriction for a cotton plug. Available length are 145mm, 225mm, 270mm, and 310mm
  • Dropping pipettes, Integrated bellows, graduated, PE-LD For sampling and decanting infectious or toxic liquids, Available volume 1.5ml with 133mm length and 5ml with 194mm length. Graduation 0.5, 1, 2,3 & 5ml

Magnetic Stirring Bars And Remover

  • Whether large volumes or highly viscous mixtures, round, square or dumbbell-shaped – here you will find the perfect magnetic stirring bar for your application.
  • Magnetic Stirring bars, cylindrical, PTFE quality, Round Shaper with and without pivot ring for smooth and uneven surface for universal application. Available length-2mm to 159mm and outer diameter from 2mm to 27mm.
  • Magnetic Stirring bars are available in cylindrical, Triangular, Octagonal, Double Ended, Oval, Crosshead

Stirring Rods

  • Stirring rods are a fundamental lab essential, and at BRAND we offer a variety of stirring rods to meet your specific needs.
  • BRAND offers stirring rods of AR-GlAS®, PTFE spatula shaped and with steel core.
  • Glass Stirring and PTFE Spatula shaped rod available in Length – 200mm, 250mm and 300mm with 8mm diameter.
  • PTFE Stirring Rods with steel core Bendable, depending on the application; the bend is permanent. Available length – 200mm, 250mm, 300mm and 400mm with 6mm diameter.

Funnels

  • Find the perfect funnel for your laboratory tasks here. Whether you want to decant liquids or powders. BRAND has the right funnel and funnel holders.
  • Conical ground with various joint funnel PP Half-round body with stem fits standard ground sockets. Ideal for filling liquids or powders into multi-neck flasks. Width available – 40mm, 50mm, and 80mm
  • Short stem borosilicate 3.3. funnel for rapid filtration. Angled at 60°, ground or fire-polished upper rim. Available stem diameter 8mm, 10mm, 16mm, and 26mm and 70mm, 80mm, 100mm, 150mm and 200mm respectively.
  • PP Funnel available outer dimeter 40mm, 50mm, 75mm, 100mm, 120mm, and 150mm and outer stem diameter 5mm, 9mm, 10mm, 13mm, 14mm and 17mm respectively.
  • PP Separating Funnel high clarity with PP screw cap and special conical PTFE stopcock for observation of contents with retention device and autocalvable (121 °C). Available nominal volume 125ml, 250ml, 500ml and 1000ml.

Water Jet Pumps

  • Water jet pumps from BRAND are a cost-effective solution for generation of vacuum and extract liquids or vapours in the laboratory.
  • We offer budget-friendly water-jet pumps that are a perfect option for achieving moderate vacuum levels.
  • Our water jet pumps offer high performance and low water consumption.
  • Variety of supplied adapters simplifies connections to most water sources. Optional reducing adapters are available reducing adapter are available
  • PP Water-Jet are having good chemical resistance and integrated non-return valve increases safety and simple operation and very easy to clean.

Weighing Pans

  • Weighing Pans are available in different types, shapes and capacity.
  • Impact PS, antistatic. Light and flat design. Ideal for weighing. Wall thickness approx. 0.2 mm.
  • Diamond shape weighing pans available in 25ml, 30ml, 100ml volume.
  • Square shape weighing pans available in 7ml, 100ml and 250ml volume.
  • Spout shape weighing pans are available in 13ml, 135ml and 250ml volume.
  • Round shape with handle ensures a stable stand and safe handling of liquids when weighing and transferring. They are available in 50ml, 100ml and 200ml volume.

Desiccators

  • Find the right glass or plastic desiccator for your drying procedures.
  • Desiccator with knob lid Borosilicate 3.3. DIN 12491 is available with Precisely ground flat flanges. Base ring surface studded to improve stability and help prevent cracks. Inter changeable lid.
  • Desiccator of Polycarbonate lid. PP base and desiccant tray. Venting stopper with non-return valve in lid. Seal between lid and base: Polychlorobutadiene rubber (CR) O-ring, compressed by vacuum. Light-weight and easy to handle.
  • Both desiccator are available in Size-15cm, 20cm and 25cm.

Erlenmeyer Flasks

  • Erlenmeyer flasks made of Plastic for various applications.
  • For storage, shaking, titration and other liquid handling functions.
  • Erlenmeyer flasks are available as wide-neck and narrow-neck flasks, with beaded rim and graduation.
  • Erlenmeyer flasks made of PP provide a good compatibility with screw cap GL 45 and wide range of lab chemicals and high clarity.
  • PP flask with caps are available in 50ml, 100ml, 250ml, 500ml and 1000ml volume.

Beakers

  • Here you will discover the selection of plastic from BRAND for mixing, boiling or preparing solutions and buffers.
  • Beakers are available in Long & Short form, With spout and available in many Size and volume from 5ml to 5000ml
  • PP, high clarity. ISO 7056. with graduation, beaded rim and spout. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions and nominal volume from 10ml to 5000ml
  • ETFE, translucent. Excellent chemical resistance. With graduation, beaded rim and spout volume- 25ml to 1000ml
  • PTFE. Excellent thermal and chemical resistance. With reinforced rim and spout. Without graduation and nominal volume from 25ml to 2000ml
  • Universal PP container with screw cap PE (yellow) y-sterile for hygienic fluid sample handling and PP screw cap PE Urine beaker with and without screw cap. Capacity-100ml