Sample Changer | Headspace Oven | 21 CFR Software

Rotary Sample Changer TW 7200

Provides sample trays or racks for up to 24 samples and titration head fittings for a variety of beaker and titrator vessels.

Features
  • Sample trays from 12 to 48 positions for sample vessels from 28 to 82
  • mm diameter
  • Titration heads and sample trays can be changed in one easy step
  • Special designs for special vessels with other diameters available on
  • request
  • Increased safety due to automatic recognition of the sample tray.
  • pH electrode calibration can be done on the sample changer
  • 2 fixed magnetic stirrer

High Sample Changer TW 7450

A robust and sturdy sample changer particularly suitable for a large number of samples, carried out via the software TitriSoft.

Features
  • Rack sizes of 42, 48 and 72 positions available
  • Titration heads and sample racks can be changed in just a few steps.
  • Connection of one pump possible
  • Special designs for special vessels with other diameters available on
  • request.
  • Very fast and quiet.
  • The usable sample vessels have a volume of 50 to 250 ml

Coulometric KF Titration Headspace Oven TO 7280
& Sample Changer TW 7650

The headspace oven technique of the TO 7280 allows the separation of the water to be titrated from liquid, solid and semi-solid (paste-like) samples. In combination with the TW 7650 sample changer, up to 49 samples can be analysed.

TO 7280 Features
  • Automatic lowering and raising of the needle head
  • Automatic switching on and off of the air/gas supply
  • Can be upgraded to a fully automatic system by connecting the Sample
  • Changer (TW7650)
  • Semi-automatic or fully automatic water determination
TW 7650 Features
  • Up to 49 samples* can be measured
  • The start drift can be determined before each sample
  • Each sample can be measured at a different temperature
  • Can be upgraded to the TO 7280 oven at any time

PC Titration Software TitriSoft 3.5 & TitriSoft 3.5P

TitriSoft 3.5 titration software can be used with Windows 7,8.1 and 10 and supports your daily work procedures during sample preparation, titration and evaluation of the results.

Titrisoft 3.5 - for TitroLine® 7000, TitroLine® 7500 KF/7500 KF trace, TitroLine® 7750/7800 and TitroLine® alpha plus

Titrisoft 3.5P - for TitroLine® 7000, TitroLine® 7500 KF/7500 KF trace, TitroLine® 7750/7800 and TitroLine® alpha plus with 21 CFR Part 11 compliance

Features
  • For TITRONIC® 300, TITRONIC® 500, TitroLine® 7000 – 7800 and sample
  • changer.
  • Connect titration hardware to any free USB or serial interface of your PC
  • All devices connected to the PC can be used in all configurations
  • Can be used exclusively for dosing tasks with piston burettes.